RADEAPCLIENT(1) 	       FreeRADIUS Daemon	       RADEAPCLIENT(1)



NAME
       radeapclient - send EAP packets to a RADIUS server, calculate responses

SYNOPSIS
       radeapclient  [-4]  [-6] [-c count] [-d raddb_directory] [-f file] [-h]
       [-i source_ip] [-q] [-s] [-r retries] [-S file] [-t timeout] [-v]  [-x]
       server {acct|auth} secret

DESCRIPTION
       radeapclient  is  a radius client program. It can send arbitrary radius
       packets to a radius server, then shows the reply. Radeapclient  differs
       from  radclient	in that if there is an EAP-MD5 challenge, then it will
       be responded to.

       radeapclient is otherwise identical to radclient.

       The EAP-Identity attribute, if present is  used	to  construct  an  EAP
       Identity message.

       The EAP-MD5-Password attribute, if present is used to respond to an MD5
       challenge.

       No other EAP types are currently supported.


OPTIONS
       -4     Use IPv4 (default)

       -6     Use IPv6

       -c count
	      Send each packet count times.

       -d raddb
	      Set dictionary directory.

       -f file
	      Read packets from file, not stdin.

       -r retries
	      If timeout, retry sending the packet retries times.

       -t timeout
	      Wait timeout seconds before retrying (may be  a  floating  point
	      number).

       -h     Print usage help information.

       -i id  Set request id to 'id'.  Values may be 0..255

       -S file
	      Read secret from file, not command line.

       -q     Quiet, do not print anything out.

       -s     Print out summary information of auth results.

       -v     Show program version information.

       -x     Enable debugging mode.


EXAMPLE
       A  sample  session that queries the remote server with an EAP-MD5 chal-
       lenge.

	      ( echo 'User-Name = "bob"';
		echo 'EAP-MD5-Password = "hello"';
		echo 'NAS-IP-Address = marajade.sandelman.ottawa.on.c';
		echo 'EAP-Code = Response';
		echo 'EAP-Id = 210';
		echo 'EAP-Type-Identity = "bob";
		echo 'Message-Authenticator = 0x00';
		echo 'NAS-Port = 0' ) >req.txt

	      radeapclient -x localhost auth testing123 <req.txt



SEE ALSO
       radclient(1)

AUTHOR
       Michael Richardson, <mcr@sandelman.ottawa.on.ca>



			       08 September 2003	       RADEAPCLIENT(1)