This is to set up Freeradius auth on Huawei S6320 running Comware Version 5.160. This method should be similar for all close to 2016 models of comware.
Switch side config:
!
domain radaccess
domain radaccess admin
!
radius-server template <template name>
radius-server shared-key cipher <cipher>
radius-server authentication <ip-address> 1812 [source interface sets here]
!
aaa
authentication-scheme default
authentication-scheme <scheme name>
authentication-mode radius local
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
domain isp
domain radaccess
authentication-scheme <auth-scheme name>
radius-server <radius-server template name>
!Freeradius server-side is set up normally like: Server-side setup:
client <network_device_management_ip> {
secret = <radius_key>
nastype = cisco
shortname = <network_device_name>
}